Lightning Conductor Installation Can Save You a Fortune

Lightning Conductor Can Protect Many Houses In Murrieta

Lightning Conductor Installation Can Save You a FortuneA lightning conductor installation is to protect buildings against direct lightning strikes by channeling the electric charge to earth. The lightning receptor and the lightning conductor are electrically connected by means of a connection area. Lightning Conductor is highly efficient in resisting the excessive currents to destroy a structure or a system.

Materials used for a lightning conductor are high purity copper or aluminum of a similar grade to that used in electrical conductors. The lightning conductor can especially be totally integrated with one blade shell. Generally, the lightning conductor can be covered by fiberglass, which may additionally be impregnated with resin.A lightning conductor installation is an installation that serves as a protection against damage by lightning by absorbing and guiding the energy of lightning to them.

The importance of lightning rods or conductors

A lightning rod (US, AUS) or lightning conductor (UK) is a metal rod or conductor mounted on top of a building and electrically connected to the ground through a wire, to protect the building in the event of lightning. If lightning strikes the building it will preferentially strike the rod, and be conducted harmlessly to ground through the wire, instead of passing through the building, where it could start a fire or cause electrocution.
A lightning rod is a single component in a lightning protection system. In addition to rods placed at regular intervals on the highest portions of a structure, a lightning protection system typically includes a rooftop network of conductors, multiple conductive paths from the roof to the ground, bonding connections to metallic objects within the structure and a grounding network. The rooftop lightning rod is a metal strip or rod, usually of copper or aluminum.
Lightning protection systems are installed on structures, trees, monuments, bridges or water vessels to protect from lightning damage. Individual lightning rods are sometimes called finials,air terminals or strike termination devices. The lightning rod was invented by Benjamin Franklin in the Americas in 1749 and, perhaps independently, by Prokop Diviš in Europe in 1754. Check more here.

Designed to protect against damage caused by high voltage lightning strikes, which can often exceed 1,000,000,000-volt-amps, a lightning conductor can divert the electrical current generated by lightning strikes and earth them to ensure maximum safety.

Save your Fortune via Lightning Protection Installation

Lightning is the visible discharge of static electricity within a cloud, between clouds, or between earth and a cloud. Lightning conceivably may have provided humankind with the first source of fire, but lightning has otherwise been a destructive force throughout human history. Strategies and apparatus for reducing the likelihood of damage by lightning are fairly old, including, for instance, lightning rods that have been in use for approximately 200 years.

Lightning can strike anywhere on earth – even at the north and south poles. Every year, thousands of people die because they did not make that small investment in a surge protector. Thousands of home and other properties were also damaged or destroyed by lighting along with the death of human beings. Prevention is the best protection against lightning protection systems must include an efficient dissipater collector; a low impedance path to earth; and low resistance interface with true earth. High earth resistance increases the potential of a lightning strike.

Lightning Protection Preserves your Structure

The significance of furnishing the buildings with enough lightning protection in Ireland cannot be overstressed, more than ever believing the anticipated economic loss for a property owner. There survive a numeral of companies specializing in earthing and safety solutions, intended to turn away latent hazards correlated with electrical surges. Read more here.

A properly installed lightning conductor can help ensure the safety of your facilities during all kinds of special events (sporting events, film shoots, outdoor fairs, etc.

How lightning protection systems work

Lightning protection systems are the modern development of the innovation pioneered by Benjamin Franklin: the lightning rod. Today, lightning protection systems are in use on thousands of buildings, homes, factories, towers, and even the Space Shuttle’s launch pad. This article will examine why lightning protection is necessary and what the systems can and cannot do.

Without a designated path to reach ground, a lightning strike may choose to instead utilize any conductor available inside a house or building. This may include the phone, cable, or electrical lines, the water or gas pipes, or (in the case of a steel-framed building) the structure itself. Lightning usually will follow one or more of these paths to ground, sometimes jumping through the air via a side flash to reach a better-grounded conductor (watch animation above). As a result, lightning presents several hazards to any house or building:

  • Fire– Fire can start anywhere the exposed lightning channel contacts, penetrates or comes near flammable material (wood, paper, gas pipes, etc) in a building – including structural lumber or insulation inside walls and roofs. When lightning follows electrical wiring, it will often overheat or even vaporize the wires, creating a fire hazard anywhere along affected circuits.
  • Side flashes – Side flashes can jump across rooms, possibly injuring anyone who happens to be in the way. They can also ignite materials such as a gasoline can in a garage. See full article here.

Lightning Conductor Will Save A Precious Building And Houses

The lightning conductor can be made exclusively of such a metallic conductor, but can also be combined with further electrically conductive elements to form the lightning conductor. Also, the pointed nature of the lightning conductor will make it acquire a number of positive charges on its tip. The lightning conductor will facilitate the way of the channel the lightning by the effect of the point.

A lightning conductor will be fitted at mast top and directly connected to the ground plate by a dedicated wiring. The lightning conductor can be formed by the cover 5 provided said the cover is made of solid metal, or by a bar embedded in the said cover. A lightning conductor can still help save your spire from certain disaster, call us here: (951) 805-1262.

Related Articles:
Compact Fluorescent Lighting Installation
Halogen Lighting Installation


Leave a Reply

Your email address will not be published. Required fields are marked *