Be Up To Code And Offer Assistance At The Same Time

Electrical Safety: Be Up to Code In Murrieta Homes

Be Up to Code and Offer Assistance at the Same TimeImproving a home by bringing the electrical wiring be up to code is essential for improving the safety of your home and your family, and it should dramatically improve the value of the home as well.  Keeping up-to-date with electrical codes can be overwhelming. Failure of a home to be up to the current electrical code is often to blame.

Bringing the wiring be up to code will increase the value of your home and make it sell(If you’re planning on flipping it).  An electrical code is a set of regulations for electrical wiring. The purpose of the electrical code is to promote public safety in a practical manner from hazards arising from the use of electricity. Electrical codes is an essential tool of the trade and describe the standards for safe electrical installations in detail.The electrical code is intended to assure that electrical wiring in a building is functional, adequate, and most of all, safe, not only should electrical work comply with the code to be legal, it should comply with the code to be safe.

Electrical hazards result in thousands of residential and commercial accidents each year. 30,000 home fires, 200 deaths, nearly 1,000 injuries, and over $600 million in property damage are associated with electric wiring, according to the National Fire Protection Association, and according to the Electrical Safety Foundation International, account for 20 percent of electrocutions. Failure of a home to be up to the current electrical code is often to blame.

What are electrical code updates?

First published in 1897, the National Electric Code (NEC) is the nation’s singular code for safe electrical installation. Prepared under the direction of the National Fire Protection Association (NFPA), the NEC sets electrical code standards for safe electrical design, installation, and inspection to protect people and property from electrical hazards.

Updates are made to the NEC’s electrical code and updated every three years to safeguard people and buildings by minimizing accidents and fire hazards resulting from the use of electricity. The 2014 NEC is the most current edition. Read more here.

The intention of an electrical code is to provide standards to ensure electrical wiring systems that are safe and unlikely to produce either electric shock or fires.

10 Wiring Problems Solved

It’s not just the nation’s power grid that’s antiquated. The wiring inside many houses is also out of date, straining to supply our ever-growing collection of electricity-hungry appliances, lighting, and electronics.

Protecting the Box
Fuse boxes, like this one, are less common these days than circuit breaker panels, but they work just fine — unless someone installs fuses with a higher amperage than the wires can safely handle. That can cause the wires to overheat, damaging their protective insulation and increasing the risk of fire. Once the insulation has been damaged, the danger remains even if the offending fuse is replaced with one that’s the proper amperage. To fix it, the old circuit must be rewired.

1. Overlamping

Uncovered junction boxes increase the risk of wire damage and shock
What it means: A light fixture has a bulb with a higher wattage than the fixture is designed for.
Code violation? Yes.
Danger level: High. The bulb’s intense heat can scorch or melt the socket and insulation on the fixture’s wires, which increases the risk of arcing — sparks that jump through the air from one wire to another — a chief cause of electrical fires. The damage to socket and wires remains even after the bulb has been removed. See more here.
An electrical code is meant to set standards for electrical wiring systems, to enhance safety and to protect against fires or electric shocks.

5 Steps to Getting Your Electrical Wiring up to Code

Upgrading your electrical wiring in the home is not only a good idea to do to maintain the safety of your household, but it is also necessary to conform to the updated building codes and national requirements for residential homes. Below you will find five essential steps in upgrading your electrical wiring to get it up to code.

Step 1 – Upgrade the Attic

If your attic is used for storage or contains any equipment, such as a heating system, you need to install a light in order to meet the following national building code: 210.70(A)(3). Install a simple light bulb (use a long lasting, energy efficient light bulb so that it will last a longer time than would a traditional light bulb). The light should be placed near the area where you will store your items or near the equipment that is in the attic.

Step 2 – Upgrade the Basement

The basement is another room that should be upgraded to get the wiring in your home up to code. If your basement is unfinished, you need to still make sure all of the outlets are protected by GFCIs. This will upgrade your home so that you meet the following building code requirement: 210.8(A)(5). Check full article here.

Be Up to Code Is A Must

In addition to protecting your home from hazards, getting your system be up to code can mean running more power to your house. Electrical Code will significantly boost worker safety, and save lives, say electrical contractors. As saving energy dollars becomes more important in plants, the electrical codes will now give guidance on the installation of smart grid management systems.

Often, rewiring residential electrical wiring to meet modern electrical code can seem like a daunting task. Bringing your wiring up to code is a simple task for our team, call us here: (951) 805-1262. Electrician to get your breaker panel upgrade and your electrical wiring be up to code are very important. Electrical Code is the practical safeguarding of persons and property from hazards arising from the use of electricity

Related Articles:
LED Filament Bulbs – What You Need to Know
LED Landscape Lighting – Safety Concerns


Leave a Reply

Your email address will not be published.